How to Refill a Clipper Classic Lighter

Quick Answer

To refill a Clipper Classic lighter, purge any remaining gas, then press a can of butane into the refill valve at the base. Wait a minute before using.

Step-by-Step Refill Guide

1. 1. Purge the Lighter: Hold the lighter upright. Use a small screwdriver or the edge of a coin to press the refill valve at the base. You'll hear a hiss as remaining gas escapes. Keep pressing until the hissing stops. Skipping this step can trap old gas and cause a weak flame.
2. 2. Shake the Butane Can: Shake the butane canister vigorously for 5–10 seconds. This mixes the propellant so the gas flows evenly. If you skip shaking, the lighter may not fill completely.
3. 3. Attach the Adapter: Fit the correct tip adapter onto the butane can nozzle. Clipper lighters use a standard universal adapter. A loose fit means gas will leak instead of filling the tank.
4. 4. Press and Fill: Invert the butane can so the nozzle points down. Press it firmly into the refill valve for 3–5 seconds. You should see liquid butane entering the lighter. Overfilling can cause leaks. Stop as soon as gas starts to escape.
5. 5. Wait Before Using: Let the lighter sit upright for at least 60 seconds. This allows the butane to stabilize and the gas to reach room temperature. Using it immediately can produce a weak or flaring flame.
6. 6. Adjust the Flame: If your lighter has a flame adjustment screw (usually on the bottom), turn it with a small screwdriver. Turn clockwise to lower the flame, counterclockwise to raise it. A flame that is too high can be dangerous and waste fuel.

Product Facts

• Clipper Classic Large | Zig-Zag - Collection 1: Clipper Classic Large features a refillable gas + flint system and an iconic shape designed with a smoker in mind. Its refillable design means you can reuse the same lighter many times, saving money and reducing waste.