How to Use a Zig-Zag 100MM Cigarette Injector
By TPB Marketplace | Published: 2026-10-28
Category: How-to Guides
Learn to load, pack, and eject perfect 100mm cigarettes with a Zig-Zag injector. Step-by-step guidance plus common mistakes to avoid.
Quick answer
Use the Zig-Zag 100MM cigarette injector by loading a tube onto the nozzle, filling the chamber with your favorite filler, and pressing the lever to pack a factory-style cigarette.
Why choose a 100mm injector
The Zig-Zag 100MM cigarette injector is built specifically for 100mm tubes, which are longer than standard king-size tubes. This means you get a longer cigarette that holds more filler, so you can enjoy a slower smoke or stretch your tobacco further.
Because the injector is designed for this exact length, the filler is packed evenly from end to end. That consistency is hard to achieve with hand rolling, and it makes your finished cigarettes look close to manufactured ones.
Choosing the right filler
Loose tobacco or herbal filler both work, but the grind matters. A medium-fine cut packs evenly and reduces the chance of air pockets. Very coarse filler can jam the chamber, while very fine dust may pack too tightly and make the cigarette hard to draw.
If you are using a herbal blend, keep it dry. Moist filler sticks to the chamber and can cause uneven packing.
Step-by-step instructions
- Prepare your filler: Break up any clumps in your loose filler so it flows freely. Fill the injector's chamber without overpacking—leave a little room for the tube to accept the filler. Avoid overfilling the chamber, or the cigarette will be too dense and hard to draw.
- Load the tube: Slide an empty 100mm tube onto the injector's nozzle. Push it all the way to the base so the tube is fully seated and won't slip during packing. Make sure the tube is fully seated; a partially loaded tube will produce a short cigarette.
- Inject the filler: Press the lever or plunger firmly and smoothly to push the filler into the tube. Use even pressure to pack the filler uniformly from end to end. Use steady, even pressure; a jerky motion can create air pockets or a loosely packed cigarette.
- Eject and inspect: Release the lever, remove the finished cigarette, and check both ends. The filler should be flush with the tube's open end, and the cigarette should feel firm but not rock hard. If the cigarette is too loose, refill the chamber slightly and re-inject; if too tight, reduce the filler amount next time.
Product facts
- Zig-Zag 100MM Cigarette Injector: The Zig-Zag 100MM cigarette injector is the perfect injector to make your own cigarettes, and the rolled cigarette looks exactly like a manufactured cigarette. This injector gives you a consistent, factory-style result that hand rolling can't match, ideal for smokers who want a uniform cigarette every time.
Zig-Zag 100MM Cigarette Injector
